Firmware Upgrade Procedure
1. Download  VS7_V114_128M_R32M.APG (about 895.6KB) from VS website and save to a memory card
2. Turn off the power
3. Insert the memory card which contains the firmware file.
4. Turn on the unit. It will execute the firmware update automatically.
5. After finished, the message “System will reboot after plugging out the memory card” will pop up. Please remove the memory card.
6. After rebooting, please check the firmware version. If the version is v1.0.14, the update is successful. Otherwise, please repeat the procedure 1~5. After finished, please delete the firmware file from the memory card to avoid the update executing again when next time inserting the memory card.
| What extra feature we support for USB OTG: |
What we do not support: |
- Recognize and use the USB flash disk.
- Recognize and use the 5-in-1 USB memory card adapter.
- Recognize and use another Viewsonic Photo Frame.
- Copy photos from USB OTG devices to internal memory or memory cards.
- Slideshow photos from USB OTG devices.
|
- No photo copy from internal memory or memory cards to USB OTG devices.
- No automatically sideshow on OTG devices when connected.
- 3.5 inches USB Hard disk supportable but AC power adaptor must be connected (Using internal Battery is not available).
|
|
